How do you Change a Toilet door handle without any issues?

Although replacing a toilet door handle might seem easy, it can quickly become annoying if the handle is damaged or obsolete. Addressing wobbly, stuck, or outdated handles greatly improves the washroom’s functionality and appearance. To replace a toilet door handle, visit https://www.handymansingapore.net/toilet-door/, where they provide expert help for all your toilet door problems.

Why Replace a Toilet Door Handle? 

The problems caused by a broken toilet door handle can be a real headache. Perhaps the toilet handle is no longer catching on the latch, or maybe it is so worn out that it is not easy to twist. If you are remodeling your bathroom, changing the door hardware can give you a way to pull the design together.

In any case, replacing the handle is a convenient solution. If you don’t know how to tackle the replacement on your own, you can always rely on the professionals at https://www.handymansingapore.net/services/ .

Tools and Materials You’ll Need

Ensure that you have the following auxiliary tools and materials before you initiate the process:

• Obtained New Toilet Door Handle: Purchase a handle that complements the design of your restroom and corresponds with the door.
• Screwdriver: Oblong-headed and Phillips screwdrivers are most likely needed.
• New Screws: You might need additional screws because the old handle’s screws might be stripped or broken.
• Measuring Tape is useful for verifying that the new handle that will be installed is the right size. 
• Drill: If the existing holes are not aligned with the new handle position, new holes will be required.

Replacing the Toilet Door Handle: Step-by-Step Instructions

The following section provides instructions for replacing the toilet door handle:

Remove the Old Handle

First, take out the handle which is old. Unbolt the handle from the door using the screwdriver. You might have to unscrew a couple of screws on both sides of the door depending on how the handle is styled. Don’t forget to set the screws aside in case they are needed for the new handle.

Checking the Mechanism

You should inspect the mechanism before installing the new handle. After removing the old handle, you should check the mechanism first which will guarantee that the new handle works properly.

• Check the Latch Mechanism: It is necessary to inspect the damage due to wear on the latch mechanism. If the latch is faulty, it can create problems.
• Check the Locking Mechanism: In absence of a latch, make sure that the lock is engaging and disengaging properly; this is crucial when dealing with handles that come with boarding locks. 
• Verify all components: Make sure that all parts such the latch and strike plate are interrelated and correspond as intended. If interrelation fails, then the misalignment becomes problematic.

Installing the New Handle

The holes on the door should correspond with the new handle, which will guarantee that everything is precise. Proper installation means that the new handle should seamlessly integrate with the door; this may require drilling new holes which may compromise the fit. Therefore, it’s recommended to utilize measuring tapes in the pre-drilling phase.

Fix the New Handle

Align the new handle and fix it in position by placing the screws and tightening them with your screwdriver. Do not over-tighten because this might damage the door along with the handle. It is advisable to check if the handle is able to rotate freely and does not fall off.

Check the Handle

Try to check the handle by rotating it to see if the latch properly engages. The door should freely open and close without any complications. If the handle looks loose or does not rotate freely, inspect it to see if the screws need tightening.

Final Adjustments

In case you updated the handle as part of the bathroom improvement project, it would be a good idea to paint or stain the door along the added hardware. Doing so would incorporate the design of the new door seamlessly into the bathroom.

When to Contact a Professional

Even the least skilled dyer will have no problem with changing a toilet door handle, but there are other aspects which might need the attention of a professional. If you are having problems with the door frame, latch mechanism, or even if the holes are not aligning correctly, sometimes it pays off to call a handyman or door specialist.